download PDF

Abstract

The paper proposes a combined equivalent circuit for a double-circuit power line with two lightning protection cables, based on a combination of phase coordinate and symmetrical components methods. The proposed approach to modeling power transmission lines allows introduction of the mutual arrangement of conductive elements on the tower (wires and lightning protection cables), including asymmetrical relative to each other. In addition, by combining the method of phase coordinates with the method of symmetrical components, the equivalent circuit as a whole and the process of preparing the initial data are simplified. The use of a combined equivalent circuit for power transmission lines makes it possible to calculate the unbalanced mode by the method of symmetrical components, while all elements, except for high voltage transmission lines, are modeled by the parameters of direct, reverse and zero sequence, and power lines are modeled in phase coordinates. The proposed PTL model is focused on performing calculations of the parameters of the single-phase short circuit mode in the 110-220 kV network of the industrial power supply system in order to remotely locate of the line fault.

Keywords

power line, phase coordinates, symmetrical components, mutual induction, ground wire.

Evgeniya A. Panova Ph.D. (Engineering), Associate Professor, Department of Electric Power Supply of Industrial Enterprises, Power Engineering and Automated Systems Institute, Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia, Electrical Power Engineering Department, Tobolsk Industrial Institute, Tobolsk Branch of the Industrial University of Tyumen, Tobolsk, Russia. This email address is being protected from spambots. You need JavaScript enabled to view it., https://orcid.org/0000-0001-9392-3346

Regina R. Sabirova Student, Department of Electric Power Supply of Industrial Enterprises, Power Engineering and Automated Systems Institute, Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia

Ivan V. Novikov Student, Department of Electric Power Supply of Industrial Enterprises, Power Engineering and Automated Systems Institute, Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia

 

1. Safar H. Power transmission line analysis using exact, nominal π, and modified π models. 2010 The 2nd International Conference on Computer and Automation Engineering, ICCAE 2010. IEEE, 2010, vol. 5, pp. 128-134. doi: 10.1109/ICCAE.2010.5451500

2. Ebrahimi R., Babaee A., Hoseynpoor M. Evaluation and calculation of overhead line impedance in distribution networks. Australian Journal of Basic and Applied Sciences, 2011, vol. 5, no. 8, pp. 1278-1284.

3. Tossani F., Napolitano F., Borghetti A. Inverse Laplace Transform of the Ground Impedance Matrix of Overhead Lines. IEEE Transactions on Electromagnetic Compatibility, 2018, vol. 60, no. 6, pp. 1-4. doi: 10.1109/TEMC.2017.2765207

4. Ametani A., Schinzinger R. Mutual Impedance of Transmis-sion Lines with Earth Return. IEEE Proceedings C: Generation Transmission and Distribution, 1980, vol. 127, no. 5, pp. 326-328. doi: 10.1049/ip-c.1980.0050

5. Holbeck J.I., Lantz M.J., Holbeck J.I. The Effects of Mutual Induction Between Parallel Transmission Lines on Current Flow to Ground Faults. Transactions of the American Institute of Electrical Engineers, 1943, vol. 62, no. 11, pp. 712-715. doi: 10.1109/T-AIEE.1943.5058634

6. Ukraintsev A.V., Nagay I.V. Virtual’ power line method to correct the calculation of current ground faults in the parallel overhead transmission lines 110-220 kV. 2016 2nd Interna-tional Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2016 – Proceedings. IEEE, 2016, pp. 1-4. doi: 10.1109/ICIEAM.2016.7911473

7. Fang H. Mutual inductances between crossing three-phase power lines and communication line both with earth return. IEEE International Symposium on Electromagnetic Compat-ibility. IEEE, 1990, pp. 483-487. doi: 10.1109/isemc.1990.252814

8. Tavares M.C., Pissolato J., Portela C.M. New multiphase transmission line model. Proceedings of International Conference on Harmonics and Quality of Power, ICHQP. IEEE, 1998, vol. 1, pp. 489-494. doi: 10.1109/ICHQP.1998.759957

9. Ivanov I., Dubinin D., Zhukov A. Overhead Line Parameter Estimation Through Synchrophasor Data in Near Real-Time. 2019 2nd International Youth Scientific and Technical Con-ference on Relay Protection and Automation, RPA 2019. IEEE, 2019. doi: 10.1109/RPA47751.2019.8958451

10. Balametov A.B., Halilov E.D., Isayeva T.M. An Adequate Mathematical Model of an Ultrahigh-Voltage Overhead Transmission Line Using Synchronized Phasor Measure-ments. Iranian Journal of Science and Technology - Transac-tions of Electrical Engineering, 2020, vol. 44, no. 1, pp. 1-9. doi: 10.1007/s40998-019-00225-3

11. V Stanojevic A., Preston G., Terzija V. Synchronised meas-urements based algorithm for long transmission line fault analysis. IEEE Transactions on Smart Grid, 2018, vol. 9, no. 5, pp. 1-10. doi: 10.1109/TSG.2017.2658675

12. Kubis A., Rehtanz C. Application of a combined electro-thermal overhead line model in power flow and time-domain power system simulations. IET Generation, Transmission and Distribution, 2017, vol. 11, no. 8. doi: 10.1049/iet-gtd.2016.1626

13. Martínez-Velasco J.A., Castro-Aranda F. Modeling of Over-head Transmission Lines for Lightning Overvoltage Calcula-tions. Ingeniare. Revista chilena de ingeniería, 2010, vol. 18, no. 1. doi: 10.4067/s0718-33052010000100013

14. Ye H., Strunz K. Multi-Scale and Frequency-Dependent Modeling of Electric Power Transmission Lines. IEEE Transactions on Power Delivery, 2018, vol. 33, no. 1, pp. 32-41. doi: 10.1109/TPWRD.2016.2630338

15. Freitas D., Guerreiro M., Neves Das, Almeida M.E., Maló Machado V. Evaluation of the longitudinal parameters of an overhead transmission line with non-homogeneous cross sec-tion. Electric Power Systems Research, 2015, vol. 119, pp. 478-484. doi: 10.1016/j.epsr.2014.11.003

16. Qi G., Zheng Y., Xia K., Wu W., Liao F., Shu S. Equivalent Circuit Parameters of Power Tap-Off from Insulated Shield Wires of High Voltage Transmission Lines at Different Rated Voltages. ICHVE 2018 - 2018 IEEE International Conference on High Voltage Engineering and Application. IEEE, 2019, pp. 1-4. doi: 10.1109/ICHVE.2018.8642003

17. Dias Pinto J.A., Coimbra A.P., Pereirinha P.G., Lemos Antunes C.F. Evaluation of the high voltage transmission line inductance and capacitance using the finite element approach. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 1998, vol. 17, no. 1–3, pp. 313-317. doi: 10.1108/03321649810203224

18. Murty P.S.R. The Line Parameters. Electrical Power Systems, 2017.

19. Panova E.A., Al'brekht A.Ya. Specified Pеr-unit Parameters of Double-circuit 110 kV Overhead Lines for Distant Fault Location. Elektrotekhnicheskie sistemy ikompleksy [Electrotechnical Systems and Complexes], 2016, no. 4(33), pp. 35-40. (In Russian). doi: 10.18503/2311-8318-2016-4(33)-35-40

20. Rukovodyashchie ukazaniya po releynoy zashchite. Vyp. 11. Raschet tokov korotkogo zamykaniya dlya releynoy zashchity i sistemnoy avtomatiki v setyakh 110-750 kV [Relay protection guidelines. Issue 11. Calculation of short-circuit currents for relay protection and system automation in 110-750 kV net-works], Moscow, Energiya Publ., 1979. 152 p. (In Russian)

Panova E.A., Sabirova R.R., Novikov I.V. Combined Equivalent Circuit of a Double-Circuit Power Transmission Line with Two Lightning Cables. Elektrotekhnicheskie sistemy i kompleksy [Electrotechnical Systems and Complexes], 2022, no. 2(55), pp. 77-81. (In Russian). https://doi.org/10.18503/2311-8318-2022-2(55)-77-81