Abstract
This paper examines the feasibility of using SF6 gas bubble bubbling in transformer oil as a promising method for removing moisture and mechanical impurities without draining the oil from the transformer tank. The aim of the research work is to theoretically substantiate the proposed method using mathematical modeling of the hydrodynamic and mass transfer processes accompanying the gas bubbles movement in mineral transformer oil. To achieve this goal, mathematical modeling of bubbling hydrodynamics, analytical relationships of mass transfer between the gas and liquid phases and the theoretical analysis of flotation extraction processes for mechanical impurities were used. The influence of bubble diameter, SF6 gas flow rate and processing time on the moisture and solid contaminant removal efficiency was assessed. Based on the calculation results, the ranges of process parameters that can ensure the highest process efficiency were determined. The obtained estimates demonstrate the possibility of reducing oil moisture content, increasing its electrical strength and removing a significant portion of mechanical impurities while maintaining the oil chemical stability by using a chemically inert working gas. It is shown that bubbling treatment can be considered as an independent oil treatment method for specific operating conditions or as a preliminary stage in a comprehensive regeneration technology that includes vacuum degassing, filtration or adsorption purification. The obtained results are theoretical in nature and can be used in the development of pilot industrial bubbling units, as well as in planning subsequent experimental studies aimed at verifying calculated dependencies and refining process parameters.
Keywords
transformer oil, purification, bubbling, SF6 gas, gas bubbles, dielectric properties, degassing, moisture content, breakdown voltage, mechanical impurities, transformer reliability, waste-free technology, resource conservation, mathematical modeling, electrical insulation materials
1. GOST 982-80. Transformer oils. Specifications. Moscow, Izdatelstvo standartov Publ., 1980. 6 p. (In Russian)
2. RD 34.43.105-89. Metodicheskie ukazaniya po ekspluatatsii transformatornykh masel [Guidelines for the operation of transformer oils]. Moscow, SPO Soyuztekhenergo Publ., 1989. (In Russian)
3. Khismatullin A.S., Konys E.M. A quick way to cool oil filled transformers. Novosti nauki Kazakhstana [Science News of Kazakhstan], 2018, no. 3(137), pp. 107–121. (In Russian)
4. Bashirov M.G., Khismatullin A.S., Kamalov A.R. Changes in Thermal Conductivity of Oil during Bubbling in the Power Transformer Cooling System. Sovremennye problemy nauki i obrazovaniya [Modern Problems of Science and Education], 2014, no. 6, pp. 338–343. (In Russian)
5. Bashirov M.G., Khismatullin A.S., Kamalov A.R. Development of Method for Increasing the Efficiency of Power Oil Transformer Cooling. Glavnyi energetic [Chief Power Engineer], 2016, no. 11, pp. 7–10. (In Russian)
6. Khismatullin A.S., Surakov M.R., Syntimirov A.A. Improving the Cooling of Oil Power Transformers by Bubbling SF6 Gas Bubbles. Inzhenernaya fizika [Engineering Physics], 2017, no. 6, pp. 27–31. (In Russian)
7. Krivetsky I.V. Discrete and frequency control of power transformer cooling and improving the energy efficiency of distribution complex transformer cooling systems. Energiya edinoy seti [Energy of Unified Grid, Scientific and Technical Journal], 2023, no. 5–6(71), pp. 54–58. (In Russian)
8. STO 70238424.27.100.053-2013. Power oils and oil systems of electric power plants and networks: organization of operation and technical maintenance, standards and requirements. Moscow, 2013. 159 p. (In Russian)
9. Vlaskin A.T., Pikalov I.I. Sposob ochistki otrabotannykh mineralnykh masel. [Method for cleaning waste mineral oils]. Patent for invention RF no. 2245901 C1, 2005.
10. Prokudin A.V., Safonov V.I., Korzhov A.V., Babaev R.M.O., Mlotok V.A. Methodology for Determining the Electrical Strength of Insulating Materials in Small Volume Cells. Vestnik Yuzhno Uralskogo gosudarstvennogo universiteta. Seriya: Energetika [Bulletin of South Ural State University. Series “Power Engineering”], 2025, vol. 25, no. 4, pp. 14–21. (In Russian). doi: 10.14529/power250402
11. Volchanina M.A., Kuznetsov A.A., Gorlov A.V. Improving the Reliability of Power Transformer Diagnostics under Seasonal Temperature Changes. Elektrotekhnicheskie sistemy i kompleksy [Electrotechnical Systems and Complexes], 2021, no. 4(53), pp. 33–38. (In Russian). doi: 10.18503/2311-8318-2021-4(53)-33-38
12. Zheng H., Li. X., Feng Y., Yang H., Lv W. Investigation on micro-mechanism of palm oil as natural ester insulating oil for overheating thermal fault analysis of transformers. High voltage, 2022, vol. 7, no. 4, pp. 812-824. doi: 10.1049/hve2.12182.
13. Kolesnikov I.E., Korzhov A.V., Gorshkov K.E. Digital program for diagnosing the status of a power transformer. IEEE, 2020. Pp. 315-321. doi: 10.1109/GloSIC50886. 2020.9267867.
14. Zotov Yu.L., Golovanchikov A.B., Shishkin E.V., Aseev P.S. Ustroistvo dlya barbotazha gazov v zhidkost [Device for bubbling gases into a liquid]. Patent RF, no. 235232 U1, 2025.
15. Lavrov N.A., Skornyakova E.A. Modeling the processes of cleaning a liquid from gas dissolved in it during bubbling. Vestnik Moskovskogo gosudarstvennogo tekhnicheskogo universiteta im. N.E. Baumana. Seriya Mashinostroenie [Herald of the Bauman Moscow State Technical University. Series Mechanical Engineering], 2010, no. S1, pp. 155–160. (In Russian)
16. Bashirov M.G., Prakhov I.V., Khismatullin A.S., Khusnutdinova I.G. Improving the methods for assessing the technical condition of power transformers. Promyshlennaya energetika [Industrial Power Engineering], 2018, no. 7, pp. 2–10. (In Russian)
17. Bashirov M.G., Minlibaev M.R., Hismatullin A.S. Improving the efficiency of power oil transformer cooling. Elektronnyi nauchnyi zhurnal Neftegazovoe delo [Electronic scientific journal Oil and Gas Business], 2014, no. 2, pp. 347-357. (In Russian)
18. Koval E.O., Bogomolov M.S., Mayer E.A., Bondaletov V.G. Adsorption purification of used transformer oil using industrial montmorillonite containing sorbents. Izvestiya Tomskogo politekhnicheskogo universiteta [Bulletin of Tomsk Polytechnic University], 2007, no. 3, pp. 86–89. (In Russian)
19. Salikhov T.P., Kan V.V., Yusupov D.T. Purification of transformer oil with adsorbents in combination with a ceramic membrane. Energobezopasnost i energosberezhenie [Energy Safety and Energy Saving], 2016, no. 3, pp. 37–41. (In Russian). doi: 10.18635/2071-2219-2016-3-37-41
20. Samonin V.V., Solovey V.N., Podvyaznikov M.L., Samonina O.I. Effect of transformer oil presence in silica gel on sorption properties. Sorbtsionnye i khromatograficheskie protsessy [Sorbtsionnye i Khromatograficheskie Protsessy], 2025, vol. 25, no. 1, pp. 26–34. (In Russian). doi: 10.17308/sorpchrom.2025.25/12791
21. Prisyazhnyuk A.N., Malovets A.B. Oil regeneration in power transformers without taking them out of service. Elektricheskie stantsii [Electrical stations], 2013, no. 7 (984), pp. 38–42. (In Russian)
22. Kolesnikov I.E., Korzhov A.V., Gorshkov K.E. Unified model for digital diagnostics of the power transformer state. Pribory [Instruments], 2021, no. 3(249), pp. 51–56. (In Russian)
23. Leivo S., Leppanen J., Aronniemi M. Effect of Moisture on the Dielectric Strength of Insulation Liquids. 2023 IEEE 22nd International Conference on Dielectric Liquids (ICDL). IEEE, 2023. Pp. 1–4. doi: 10.1109/ICDL59152.2023. 10209338
Khismatullin A.S., Altynbaeva A.A., Gareev D.R. Theoretical Justification of Transformer Oil Bubbling Treatment Using SF6 Gas. Elektrotekhnicheskie sistemy i kompleksy [Electrotechnical Systems and Complexes], 2026, no. 3(72), pp. 15-21. (In Russian). https://doi.org/10.18503/2311-8318-2026-3(72)-15-21