Abstract

Full Text

When developing a source for smooth regulation of the voltage supplied to the primary circuit of the resonant circuit of a high-potential test transformer, the task is to protect the source from abnormal operating modes and to continuously measure the current, as well as to research and develop a protection circuit for an adjustable AC voltage source with continuous measurement of the output current load not exceeding ± 5%. In solving the problem, the authors proposed to develop and investigate current sensors of world manufacturers of semiconductor devices and, on their basis, for the purpose of import substitution, develop a current sensor that can meet or even exceed similar devices in terms of technical characteristics. In the course of the study, a current sensor of the DT-RS-1.0A type was developed, which makes it possible to measure the output current of an adjustable AC voltage source within the average value of the main reduced error of 1.26%. The use of the developed solution for measuring the output current of an adjustable AC voltage source for the purpose of continuous monitoring and protection against exceeding the specified settings will allow creating on its basis a number of digital measuring ammeters that allow measuring and controlling alternating current in the range from 1 mA to 1000 mA.

Keywords

adjustable AC voltage source, pulse-width modulation, insulation test, overvoltage, high-voltage test setup, test object, resonance.

Regina T. Khazieva

Ph.D. (Engineering), Associate Professor, Department of Industrial Electrical Engineering and Electrical Equipment, Ufa State Oil Technical University, Ufa, Russia, This email address is being protected from spambots. You need JavaScript enabled to view it., https://orcid.org/0000-0002-7075-0363

Zuhra Kh. Pavlova

D.Sc. (Engineering), Associate Professor, Department Professor, Institute Director, Department of Industrial Electrical Engineering and Electrical Equipment, Institute of Digital Systems, Automation and Power Engineering, Ufa State Oil Technical University, Ufa, Russia, This email address is being protected from spambots. You need JavaScript enabled to view it., https://orcid.org/0000-0003-4767-972X

Aleksey A. Serdyuk

Manufacturing Director, Engineering Research Centre «Resonance Systems» Ltd, Ufa, Russia, This email address is being protected from spambots. You need JavaScript enabled to view it., https://orcid.org/0000-0002-9259-5122

Andrey V. Mukhametshin

Associate Professor, Department of Electrical Engineering and Electrotechnics affiliated with the Department of Industrial Electrical Engineering and Electrical Equipment, Ufa State Oil Technical University, Ufa, Russia, This email address is being protected from spambots. You need JavaScript enabled to view it., https://orcid.org/0000-0002-5098-6483

1. State Standard 1516.2-97. Electrical equipment and installations for a.c. voltages 3 kV and higher. Moscow, STANDARTINFORM Publ., 1997. 35 p. (In Russian)

2. State Standard R 55194-2012. Electrical equipment and installation for a.c. voltages from 1 to 750 kV. General methods of dielectric tests. Moscow, STANDARTINFORM Publ., 2012. 57 p. (In Russian)

3. Koryavin A.R., Volkova O.V., Milkin E.A. Modern problems of domestic standardization of test voltages and test methods for high voltage electrical equipment. Electrichestvo [Electrichestvo], 2013, no. 7, pp. 30-35. (Russian)

4. Monastyrsky A.E. Test methods and diagnostics of cable lines with XLPE insulation. Elektrooborudovanie: ekspluatatsia i remont [Electrical equipment: operation and repair], 2019, no. 10, pp. 43-47. (In Russian)

5. Tutarinov A.S., Romanenko N.G. Mathematical modeling of the influence of external factors on characteristics of cable line. Vestnik Astrakhanskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: upravleniye, vychislitelnaya tehnika i informatika [Bulletin of Astrakhan state technical university. Series: management, computer science and informatics], 2018, no. 4, pp. 107-116. doi: 10.24143/2072-9502-2018-4-107-116 (In Russian)

6. Kalinin I.M., Savchenko O.V., Khmel Yu. Tests, checks and diagnostics of ship medium voltage transformers. Trudy Krylovskogo gosudarstvennogo nauchnogo tsentra [Proceedings of the Krylov state research centre], 2022, no. 2(400), pp. 103-115. doi: 10.24937/2542-2324-2022-2-400-103-115 (In Russian)

7. Shonin Yu. P. Technical evaluation of power oil transformers. Bibliotechka elektrotekhnika [Library for an electrical engineer], 2020, no. 1-2(253), pp. 1-94. (In Russian)

8. Astashov A.G., Leonov V.M. Voltage regulators for traction substations. Avtomatika, svyaz, informatika [Automation, communication, informatics], 2018, no. 2, pp. 26-27. (In Russian)

9. Terentiev P.V., Korablev A.A., Chesnokov M.V. Research of voltage stabilizers as consumers and converters of electrical energy. Nauka i obrazovanie [Science and Education], 2019, no. 4, p. 301. (In Russian)

10. Khorolsky V.Ya., Efanov A.V., Antonov S.N., Privalov E.E. Mathematical description of transient processes in converters and voltage stabilizers of standalone power-supply systems. Elektrotekhnika [Electrical engineering], 2021, no. 47, pp. 58-61. (In Russian)

11. Guretsky Yu.V., Yashin M.G. Protection of electrical consumers of railway automation and telemechanics equipment from hazardous effects of harmonic distortions of the supply voltage. Spetsialnaya tehnika i tehnologii transporta. [Special Technique and Transport Technologies], 2021, no. 10, pp. 139-146. (In Russian)

12. Glukhova O.E., Slepchenkov M.M., Pukhareva T.A., Kolosov D.A. Ionistor Ac Voltage Regulator: Features Of Work And Main Characteristics. Radiotekhnika [Radio-engineering], 2019, no. 8(12), pp. 109-114. doi: 10.18127/j00338486-201908(12)-17 (In Russian)

13. Bondar S.N., Vakhtina E.A., Mishukov S.V., Konstantinova E.E. A low-noise dc voltage stabilizer based on a general-purpose reference voltage source. Elektrotekhnika [Russian Electrical Engineering], 2021, no. 7, pp. 37-42. (In Russian)

14. Zakharov L.F. Рulse voltage stabilizer with wide input voltage change limits. Electrosvyaz [Electrical communication], 2018, no. 11, pp. 81-82. (In Russian)

15. Khazieva R.T., Mukhametshin A.N. Development and research of the circuit for measuring the leakage current when testing the insulation with the higher rectified voltage. Izvestiya vysshykh uchebnykh zavedeniy. Problemy energetiki [Power engineering: research, equipment, technology], 2021, no. 4, pp. 145-155. doi: 10.30724/1998-9903-2021-23-4-145-155 (In Russian)

16. Martynov B.A., Khazieva R.T., Mukhametshin A.N. Protection of the current measuring circuit of a resonance testing installation. Elektrotekhnicheskie i informatsionnye kompleksy i sistemy [Electrical and data processing facilities and systems], 2021, no. 2, pp. 26-40. doi: 10.17122/1999-5458-2021-17-2-26-40 (In Russian)

17. Khazieva R.T., Vasilyev P.I., Aflyatunov R.R. Installation for testing insulation of electrical equipment with increased voltage. Elektrotekhnicheskie sistemy i kompleksy [Electrotechnical systems and complexes], 2022, no. 3(56), pp. 65-69. doi: 10.18503/2311-8318-2022-3(56)-65-69 (In Russian)

18. Rentyuk V. TLI4971 - Infineon new sensor: accurate and reliable current measurement. Komponenty i tekhnologii [Components and technologies], 2020, no. 1(222), pp. 18-22. (In Russian)

19. Sukhov D.V., Shevtsov D.A., Shishov D.M. Transformer current sensor based on resistance-inductance multivibrator. Prakticheskaya silovaya elektronika [Practical power electronics], 2021, no. 2(82), pp. 34-38. (In Russian)

20. State Standard IEC 60950-1-2014. Information technology equipment. Safety. Part 1. General requirements, STANDARTINFORM Publ., 2014. 239 p. (In Russian)

21. CSA CAN/CSA-C22.2 NO. 60065:03 Audio, video and similar electronic apparatus – Safety requirements. CSA Publ., 2003. 8 p. (In Canadian Standards Association)

22. Potekhin S.P., Balashevich V.M., Koptyaev E.N. Leakage current sensor for insulation resistance control systems. Naucho-tekhnicheskie vedomosti Sevmashvtuza [Scientific and Technical Bulletin of Sevmashvtuza], 2021, no. 1, pp. 4-12. (In Russian)

23. Rudenko E.A., Yakovleva A.S. Hall sensor - independent and essential assistant in modern technology. Nauchno-tekhnicheskoe i ekonomicheskoe sotrudnichestvo stran ATP v XXI veke [Scientific, technical and economic cooperation of the Asia-Pacific countries in the 21st century], Khabarovsk, 2020, vol. 1, pp. 144-147. (In Russian)

24. Lebedev V.A. Welding current sensor. Pribory i sistemy. Upravlenie, control, diagnostika. [Devices and systems. Management, control, diagnostics], 2018, no. 9, pp. 52-56. (In Russian)

25. Nikitin K.I., Vlasov A.Yu., Tereshchenko N.A., Makovetsky S.S., Markovsky V.P. Resistive current sensor. Aktualnye voprosy energetiki [Current issues of energy], 2019, no. 1, pp. 88-92. (In Russian)

26. Potekhin S.P., Balashevich V.M., Koptyaev E.N. Leakage current sensor for insulation resistance control systems. Naucho-tekhnicheskie vedomosti Sevmashvtuza [Scientific and Technical Bulletin of Sevmashvtuza], 2021, no. 1, pp. 4-5. (In Russian)

Khazieva R.T., Pavlova Z.Kh., Serdyuk A.A., Mukhametshin A.V. Development and Research of Current Sensors to Protect the Supply of Adjustable Voltage of a Resonant Test Device. Elektrotekhnicheskie sistemy i kompleksy [Electrotechnical Systems and Complexes], 2023, no. 1(58), pp. 76-83. (In Russian). https://doi.org/10.18503/2311-8318-2023-1(51)-76-83